Thursday, February 15, 2007
Nottingham, UK - 3D Laser Mapping, the UK based specialists in laser measurement technology and software, is helping Kumba Iron Ore to improve the safety of iron ore extraction in South Africa. 3D Laser Mapping has supplied and installed a Riegl LMS Z420i laser scanner, the first scanner of its type in South Africa, which is being used to monitor slope deformation in order to reduce the levels of risk to personnel and equipment that occur as a result of potential slope failure. The system uses the latest laser technology to capture highly accurate slope measurements that are then analysed to identify areas of movement and therefore potential failure.
"The laser scanning system has a number of features that make it ideal for our environment and application. The scanner covers a broad area so even small failures can be detected, operates at a range of 800m, is mobile, easy to use and well supported." said Glen Mc Gavigan of Kumba Iron Ore's Geotechnical Services. He continued, "Laser scanning complements our existing slope monitoring equipment and adds an extra dimension to the monitoring network at Sishen; improving the safety of personnel and reducing risk in our operations."
The Riegl LMS Z420i laser scanner is specifically designed for the mining environment. The system comprises of a high performance long range 3D laser scanner, associated operating and processing software and an integrated and calibrated high resolution digital camera. The unit is rugged and fully portable and offers an unrivalled combination of wide field of view, high maximum range and fast data acquisition.
Kumba Iron Ore is the first mining company to be listed on the Johannesburg Stock Exchange that concentrates wholly on the extraction of iron ore. Formed as a result of the restructuring of Kumba Resources, a process that also created Exxaro, Kumba Iron Ore is majority owned by Anglo American plc. The newly formed Kumba Iron Ore has two operations in South Africa, which combined make it the fourth largest supplier of sea-borne iron ore, exporting 73% of its 32Mtpa production. Sishen mine based in the district of Postmasburg in the Northern Cape of South Africa is the larger of the two operations. A conventional open pit operation with extraction dating back to the 19th Century Sishen achieved a record production of 28.5 million tonnes last year.
3D Laser Mapping is a UK based specialist in laser scanning solutions and the Riegl Premier Distributor for the UK, Ireland and sub-Saharan Africa. 3D Laser Mapping integrate laser scanner hardware systems with their own software and peripherals to create robust solutions for mapping, mining and manufacturing to name just a few.
Friday, July 22, 2016
ReverseEngineering.com has recently released a HIPP 2016 add-on for ANSYS SpaceClaim and SpaceClaim Direct Modeler
Wednesday, July 20, 2016
A team of Stanford researchers has recently added a level of automation to the existing process of collecting reliable building information with the aid of 3D scanners.
Wednesday, June 29, 2016
3D scanning technology is still relatively new compared to touch probing and other metrology and non-destructive testing methods. But according to a recent report from MarketsandMarkets, the 3D scanner market is on the rise.
Monday, June 6, 2016
Autodesk has finally allowed its photogrammetry software Memento to shed its beta skin and evolve into a full-blown piece of commercial software
Friday, June 3, 2016
Whether you're recording historical sites for preservation or mapping out older buildings for operations purposes, laser scanning has a big role to play in architecture, engineering and construction (AEC) and building information modeling (BIM).
Friday, May 27, 2016
Augmented reality (AR) is a technology that allows you to superimpose computer-generated images created in CAD or building information modeling (BIM) software onto a user’s view of the real world, which creates a composite or augmented view.
Monday, April 18, 2016
Point clouds are notoriously unwieldy things. With millions of individual points converging to create a model, it can be a time-consuming task to convert a point cloud into a usable rendering.
Thursday, March 17, 2016
LAKE MARY, Fla. -- FARO Technologies, Inc. (NASDAQ: FARO), the world's most trusted source for 3D measurement, imaging, and realization technology, announces the launch of the FARO Early Adopter (EA) Program.
Monday, April 16, 2012
Camera design and manufacturing company, NCTech, is today launching the world’s first fully automatic instant 360º panoramic camera at SPAR International 2012 in Texas.
Monday, April 16, 2012
PARIS, April 16, 2012 Trimble (NASDAQ:TRMB) today introduced three new solutions for heavy civil construction professionals, the Trimble® Connected Office, the Trimble Connected Controller and the Trimble Connected Machine.
Wednesday, February 15, 2012
Every year, wastewater managers must make decisions about which portions of their collection system should be maintained, rehabilitated or replaced.
Thursday, February 9, 2012
FARO Introduces Next Generation Focus3D Laser Scanner
Wednesday, February 22, 2012
ORLANDO, Fla. – If any presentation here at the FARO 3D Documentation Conference truly got attendees thinking it was Tuesday’s talk by Tom Kurke and Michael Weinberg.
Monday, July 27, 2009
Certified Associate and Certified Professional exams now available for newest versions of AutoCAD, Autodesk Inventor, Autodesk Revit Architecture, and AutoCAD Civil 3D Software
Friday, June 15, 2007
STANDARD METHOD FOR MEASURING FLOOR AREA IN OFFICE BUILDINGS Q and A
Thursday, February 15, 2007
3D Laser Mapping, the UK based specialists in laser measurement technology and software, is helping Kumba Iron Ore to improve the safety of iron ore extraction in South Africa.
Monday, February 12, 2007
Architects should use caution when giving record drawings to clients and when creating “as-built” drawings. Examples of provisional language that might be used to mitigate the risk involved with “as- built” drawings are included.
Wednesday, January 17, 2007
Measuring Floor Area for Commercial Leases
Monday, January 15, 2007
3D Laser Mapping has launched a mobile mapping system designed to capture asbuilt 3D measurements of overhead telecom networks.
Wednesday, January 10, 2007
EXTON, PA., January 4 /CNW/ - Bentley Systems, Incorporated today announced Bentley OnSite, breakthrough software that connects the worlds of civil engineering design and construction.
Wednesday, December 13, 2006
CALGARY, Alberta, December 13, 2006 - GiveMePower Corporation (OTCBB: GMPW), today launched two new ultra-mobile computing solutions for building surveying and inspection, construction area estimating and reporting, and facilities asset and information management.
Wednesday, November 29, 2006
3D Laser Mapping has launched StreetMapper 2, a new modular vehicle-mounted system for rapid 3D mapping on and off road. The portable system uses lasers to 3D map assets and the landscape to millimeter accuracy at speeds of up to 70 km an hour.
Tuesday, November 8, 2005
Autodesk, Inc. (Nasdaq: ADSK) today announced support for Microsoft Visual Studio 2005, the .NET Framework 2.0 and Microsoft SQL Server 2005. Autodesk and Microsoft work together across many technology areas.
Monday, November 6, 2006
BIM is certainly changing the way buildings are designed and constructed, but is it changing how they're operated and maintained?
Thursday, November 2, 2006
Prime Edge Asbuilt Services today announced that it is underway to develop a full set of business applications for use by of professionals within construction, property management and design industries.
Saturday, October 21, 2006
Preparing for the changes of aging, including declining mobility, is also a concern.
Tuesday, October 12, 2010
It is almost given that at some point or throughout the project you will be hiring an Architect and a General Building Contractor to design and build what you have in mind. This article is written with homeowner in mind as a guideline for a very interesting and education experience of remodeling your house which waits ahead of you. First thing that you as a homeowner should understand is the fact that construction project you are about to begin is complex.
Tuesday, October 10, 2006
Autodesk, Inc. (Nasdaq: ADSK)today announced the launch of the Autodesk FMDesktop Product Suite, a powerful, easy-to-use software solution for facilities management.
Monday, October 9, 2006
Ranal Software Solutions – one of the leading PLM products and service providers, and part of the Ranal Group – has launched CAMeLEAN®/PM, in India. CAMeLEAN®/PM is a complete project management suite that guides organizations through the entire project management lifecycle.
Friday, September 15, 2006
Most contractors know that next to the finished product, the as-builts documentation is essential part of a construction project. As-builts are the final blueprint drawings which reflect changes made in the field during the construction of a new structure or an addition to an existing.
Monday, August 21, 2006
FeaturePics.com, an emerging stock photography web site, which have been serving photographing community since 2004 had agreed to work on the development of new stock photography interface with Prime Edge Asbuilt Services, a professional service in SF Bay Area serving a network of Architects, Homeowners and General Contractors.
Monday, April 3, 2006
Autodesk, Inc. (NASDAQ: ADSK), today announced it has completed the acquisition of Constructware, a privately held company based in Alpharetta, Georgia that provides on-demand communication and collaboration solutions that streamline design, construction and facility management. The acquisition, announced on February 7, 2006, closed for cash consideration of US $46 million (see press release).
Friday, March 24, 2006
Autodesk Revit Building 9, Revit Structure 3, ADT 2007, Autodesk Building Systems 2007, Autodesk VIZ 2007 launched.
Tuesday, April 5, 2005
As-builts – Problems & Proposed Solutions
Friday, May 28, 2004
Measuring square footage is not always an exact science. There are a number of rentable square footage measurement standards commonly used in the commercial real estate market.
Friday, January 31, 1997
The American National Standard for measuring floor area in office buildings is changing. The new version (officially labeled ANSI/BOMA Z65.1-1996) is an improved method designed to meet the current and future needs of the many industry professionals concerned with the measurement of office buildings.
Thursday, July 9, 2009
In his inaugural speech the new President made many references to using our natural resources more wisely, to reducing our carbon and water footprints, and investing in smart electric grids and other similar new energy-efficient technologies. Energy conservation and sustainability are top priorities and efforts are underway in many states to reinforce that--many offering fast tracked permitting to those projects that are "green".
Wednesday, July 22, 2009
Leica Geosystems announces the immediate availability of Leica CloudWorx™ 1.0 for SmartPlant 3D. This powerful and easy-to-learn point cloud solution is designed for Intergraph SmartPlant 3D users who want to take full advantage of accurate, laser scan as-built data directly in SmartPlant 3D.