Trimble Introduces New Positioning Solution for Tunnel Construction

Monday, April 16, 2012

PARIS, April 16, 2012 Trimble (NASDAQ:TRMB) today introduced three new solutions for heavy civil construction professionals, the Trimble® Connected Office, the Trimble Connected Controller and the Trimble Connected Machine.

When used together to create the Trimble Connected Site® solution, time and cost can be saved at every stage, virtually eliminating steps in the plan, design, construct and operate process. Trimble's Connected Site can improve the efficiency of construction projects, resulting in the earlier completion of higher quality projects at a lower cost.

"The Trimble Connected Site uses construction technology to improve efficiency and productivity, while minimizing waste and expense," said Roz Buick, vice president and general manager for Trimble's Civil Construction Division. "Trimble solutions empower contractors with site-wide information integration, and transform the way a contractor gets the job done."

The announcement was made at Intermat 2012, the international exhibition of equipment, machinery and techniques for the construction and materials industries.

The Connected Office

The Trimble Connected Office solution uses software and hosted services to create 3D construction models, perform data preparation and takeoff, wirelessly sync data, monitor site productivity, and manage fleets and assets. The 3D design model created in the office can be sent wirelessly to the field, increasing efficiency, reducing rework and saving money. Additionally, a complete view of site productivity, including materials quantity and movement, volume and compaction data, and fleet and asset management information, can be shared across the organization to enable rapid decision-making and better communication.

The Connected Controller

The Trimble Connected Controller solution wirelessly syncs a Trimble Site Positioning System in the field with the office and allows the Trimble Controller to receive GNSS corrections via the Internet. A grade checker can receive the design model, create new measurements and then send the measurement and stakeout results back to the office for review. Design changes originating in the office can also be sent to the controller so field crews are rapidly updated with current information. All of this is accomplished without personnel ever leaving the site or their desk, increasing productivity and reducing costs.

The Connected Machine

The Trimble Connected Machine solution uses hardware included in all Trimble Grade Control Systems to help contractors connect their assets and see what machines are doing. Machines can collect as-built measurement data for office delivery, and receive GNSS corrections using the Internet. A 3D design created in the office can be sent to the machine operator for faster, more precise grading and earthmoving. Additionally, the machine can be used for volume measurements, so expensive measurements by grade checkers occur less frequently. Drive time and rework are also minimized, as both the office and machines in the field are kept up-to-date with the latest information.

Availability

The new Trimble Connected Office, Trimble Connected Controller and Trimble Connected Machine solutions are available now through Trimble's worldwide SITECH® Technology Dealer Channel.

About Trimble's Heavy Civil Construction Division

Trimble's Heavy Civil Construction Division is a leading innovator of productivity solutions for the heavy and highway contractor. Trimble's solutions leverage a variety of technologies, including Global Positioning System (GPS), construction lasers, total stations, wireless data communications, the Internet, and application software. As part of the Trimble Connected Site strategy, these solutions provide a high-level of process and workflow integration from the design phase through to the finished project—delivering significant improvements in productivity throughout the construction lifecycle.

About Trimble

Trimble applies technology to make field and mobile workers in businesses and government significantly more productive. Solutions are focused on applications requiring position or location -- including surveying, construction, agriculture, fleet and asset management, public safety and mapping. In addition to utilizing positioning technologies, such as GPS, lasers and optics, Trimble solutions may include software content specific to the needs of the user. Wireless technologies are utilized to deliver the solution to the user and to ensure a tight coupling of the field and the back office. Founded in 1978, Trimble is headquartered in Sunnyvale, Calif.

For more information, visit: www.trimble.com.

Friday, July 22, 2016

New Add-On Combines 3D Scanning and CAD for Reverse Engineering

ReverseEngineering.com has recently released a HIPP 2016 add-on for ANSYS SpaceClaim and SpaceClaim Direct Modeler

Wednesday, July 20, 2016

New Method for 3D Scanning Buildings Uses Machine Learning

A team of Stanford researchers has recently added a level of automation to the existing process of collecting reliable building information with the aid of 3D scanners.

Wednesday, June 29, 2016

Is 3D Scanning the Future of Measurement?

3D scanning technology is still relatively new compared to touch probing and other metrology and non-destructive testing methods. But according to a recent report from MarketsandMarkets, the 3D scanner market is on the rise.

Monday, June 6, 2016

Autodesk Releases ReMake, a Photogrammetry Program for Everyone

Autodesk has finally allowed its photogrammetry software Memento to shed its beta skin and evolve into a full-blown piece of commercial software

Friday, June 3, 2016

5 Cool Point Cloud Projects

Whether you're recording historical sites for preservation or mapping out older buildings for operations purposes, laser scanning has a big role to play in architecture, engineering and construction (AEC) and building information modeling (BIM).

Friday, May 27, 2016

Augmented Reality for Architects and Civil Engineers

Augmented reality (AR) is a technology that allows you to superimpose computer-generated images created in CAD or building information modeling (BIM) software onto a user’s view of the real world, which creates a composite or augmented view.

Monday, April 18, 2016

Making a Detailed Point Cloud Without Spending All Day on It

Point clouds are notoriously unwieldy things. With millions of individual points converging to create a model, it can be a time-consuming task to convert a point cloud into a usable rendering.

Thursday, March 17, 2016

FARO® Introduces World's First 3D Scan Localizer and the First FARO Innovation Product Introduction in FARO's New Early Adopter (EA) Program

LAKE MARY, Fla. -- FARO Technologies, Inc. (NASDAQ: FARO), the world's most trusted source for 3D measurement, imaging, and realization technology, announces the launch of the FARO Early Adopter (EA) Program.

Monday, April 16, 2012

iSTAR® the world’s first automatic rapid 360º camera launches in Texas

Camera design and manufacturing company, NCTech, is today launching the world’s first fully automatic instant 360º panoramic camera at SPAR International 2012 in Texas.

Monday, April 16, 2012

Trimble Introduces New Positioning Solution for Tunnel Construction

PARIS, April 16, 2012 Trimble (NASDAQ:TRMB) today introduced three new solutions for heavy civil construction professionals, the Trimble® Connected Office, the Trimble Connected Controller and the Trimble Connected Machine.

Wednesday, February 15, 2012

Laser Technologies: Taking the Guesswork Out of Pipeline Condition Assessment

Every year, wastewater managers must make decisions about which portions of their collection system should be maintained, rehabilitated or replaced.

Thursday, February 9, 2012

Laser scanner from Faro Technologies measures up to 976,000 points/s

FARO Introduces Next Generation Focus3D Laser Scanner

Wednesday, February 22, 2012

Do you have permission to scan that building?

ORLANDO, Fla. – If any presentation here at the FARO 3D Documentation Conference truly got attendees thinking it was Tuesday’s talk by Tom Kurke and Michael Weinberg.

Monday, July 27, 2009

Autodesk 2010 Certification Now Available for Design Professionals

Certified Associate and Certified Professional exams now available for newest versions of AutoCAD, Autodesk Inventor, Autodesk Revit Architecture, and AutoCAD Civil 3D Software

Friday, June 15, 2007

STANDARD METHOD FOR MEASURING FLOOR AREA IN OFFICE BUILDINGS Q and A

STANDARD METHOD FOR MEASURING FLOOR AREA IN OFFICE BUILDINGS Q and A

Thursday, February 15, 2007

3D Laser Mapping Supports Kumba Iron Ore Extraction

3D Laser Mapping, the UK based specialists in laser measurement technology and software, is helping Kumba Iron Ore to improve the safety of iron ore extraction in South Africa.

Monday, February 12, 2007

Certifying As-built or Record Drawings

Architects should use caution when giving record drawings to clients and when creating “as-built” drawings. Examples of provisional language that might be used to mitigate the risk involved with “as- built” drawings are included.

Wednesday, January 17, 2007

Measuring Floor Area for Commercial Leases

Measuring Floor Area for Commercial Leases

Monday, January 15, 2007

3D Laser Mapping Launches Telecom Mapping System

3D Laser Mapping has launched a mobile mapping system designed to capture asbuilt 3D measurements of overhead telecom networks.

Wednesday, January 10, 2007

Bentley OnSite Connects Worlds of Civil Engineering Design and Construction Speeds Project Construction, Decreases Project Risk and Costly Rework

EXTON, PA., January 4 /CNW/ - Bentley Systems, Incorporated today announced Bentley OnSite, breakthrough software that connects the worlds of civil engineering design and construction.

Wednesday, December 13, 2006

GiveMePower Launches PowerCAD SiteMaster Turn-On-and-Go

CALGARY, Alberta, December 13, 2006 - GiveMePower Corporation (OTCBB: GMPW), today launched two new ultra-mobile computing solutions for building surveying and inspection, construction area estimating and reporting, and facilities asset and information management.

Wednesday, November 29, 2006

3D Laser Mapping Launches StreetMapper 2

3D Laser Mapping has launched StreetMapper 2, a new modular vehicle-mounted system for rapid 3D mapping on and off road. The portable system uses lasers to 3D map assets and the landscape to millimeter accuracy at speeds of up to 70 km an hour.

Tuesday, November 8, 2005

Autodesk Supports Visual Studio, .NET Framework, MS SQL

Autodesk, Inc. (Nasdaq: ADSK) today announced support for Microsoft Visual Studio 2005, the .NET Framework 2.0 and Microsoft SQL Server 2005. Autodesk and Microsoft work together across many technology areas.

Monday, November 6, 2006

How can BIM benefit facilities management?

BIM is certainly changing the way buildings are designed and constructed, but is it changing how they're operated and maintained?

Thursday, November 2, 2006

Prime Edge Asbuilt Services proposes a new method for building field data verifications

Prime Edge Asbuilt Services today announced that it is underway to develop a full set of business applications for use by of professionals within construction, property management and design industries.

Saturday, October 21, 2006

Building for Boomers

Preparing for the changes of aging, including declining mobility, is also a concern.

Tuesday, October 12, 2010

Management of Potential Change Orders with As-builts

It is almost given that at some point or throughout the project you will be hiring an Architect and a General Building Contractor to design and build what you have in mind. This article is written with homeowner in mind as a guideline for a very interesting and education experience of remodeling your house which waits ahead of you. First thing that you as a homeowner should understand is the fact that construction project you are about to begin is complex.

Tuesday, October 10, 2006

Autodesk Releases FMDesktop 7.0 Product Suite

Autodesk, Inc. (Nasdaq: ADSK)today announced the launch of the Autodesk FMDesktop Product Suite, a powerful, easy-to-use software solution for facilities management.

Monday, October 9, 2006

Ranal Launches CAMeLEAN/PM Project Management Suite

Ranal Software Solutions – one of the leading PLM products and service providers, and part of the Ranal Group – has launched CAMeLEAN®/PM, in India. CAMeLEAN®/PM is a complete project management suite that guides organizations through the entire project management lifecycle.

Friday, September 15, 2006

Your As-Builts Are Your Blueprint for Success

Most contractors know that next to the finished product, the as-builts documentation is essential part of a construction project. As-builts are the final blueprint drawings which reflect changes made in the field during the construction of a new structure or an addition to an existing.

Monday, August 21, 2006

FeaturePics.com and Prime Edge As-Built Services to Combine Forces to Create a New Field in Stock Photography

FeaturePics.com, an emerging stock photography web site, which have been serving photographing community since 2004 had agreed to work on the development of new stock photography interface with Prime Edge Asbuilt Services, a professional service in SF Bay Area serving a network of Architects, Homeowners and General Contractors.

Monday, April 3, 2006

Autodesk Completes Acquisition of Constructware

Autodesk, Inc. (NASDAQ: ADSK), today announced it has completed the acquisition of Constructware, a privately held company based in Alpharetta, Georgia that provides on-demand communication and collaboration solutions that streamline design, construction and facility management. The acquisition, announced on February 7, 2006, closed for cash consideration of US $46 million (see press release).

Friday, March 24, 2006

Autodesk Updates Building Solutions Complete Portfolio

Autodesk Revit Building 9, Revit Structure 3, ADT 2007, Autodesk Building Systems 2007, Autodesk VIZ 2007 launched.

Tuesday, April 5, 2005

As-builts – Problems & Proposed Solutions

As-builts – Problems & Proposed Solutions

Friday, May 28, 2004

How big is a square foot? It all depends on your audience

Measuring square footage is not always an exact science. There are a number of rentable square footage measurement standards commonly used in the commercial real estate market.

Friday, January 31, 1997

New BOMA standards clarify lease space

The American National Standard for measuring floor area in office buildings is changing. The new version (officially labeled ANSI/BOMA Z65.1-1996) is an improved method designed to meet the current and future needs of the many industry professionals concerned with the measurement of office buildings.

Thursday, July 9, 2009

BIM and Laser Scanning for As-built and Adaptive Reuse Projects: The Opportunity for Surveyors

In his inaugural speech the new President made many references to using our natural resources more wisely, to reducing our carbon and water footprints, and investing in smart electric grids and other similar new energy-efficient technologies. Energy conservation and sustainability are top priorities and efforts are underway in many states to reinforce that--many offering fast tracked permitting to those projects that are "green".

Wednesday, July 22, 2009

Leica Geosystems Announces the Release of Leica CloudWorx 1.0 for SmartPlant 3D

Leica Geosystems announces the immediate availability of Leica CloudWorx™ 1.0 for SmartPlant 3D. This powerful and easy-to-learn point cloud solution is designed for Intergraph SmartPlant 3D users who want to take full advantage of accurate, laser scan as-built data directly in SmartPlant 3D.